If you have a 2014-up RAM 2500 and want to add traction bars for that traction bar look, this 2014-2026 Dodge Ram 2500 rear traction bar kit is the right kit for you!
 
 
Because Ram 2500s are factory 4 linked on the rear, you can't just add a normal traction bar kit, as it would bind with the existing factory 4 link and cause major failures. That's why we designed this traction bar kit, it works perfectly with the factory 4 link. This kit is designed with a axle pivot shackle, that allows the traction bar to pivot freely at the rear axle and not bind up. With this kit you can get the traction bar look without modifing the factory rear 4 link!
 
NOTE, THIS TRACTION BAR KIT IS FOR "LOOKS" ONLY, IT DOES NOT ACT AS A TRACTION BAR TO PREVENT AXLE WRAP. We have longarm 4 link kits available for those needing to fix axle wrap issues. 
 
 
The traction bar is made from 1.875'' OD tube, and features our bolt-on frame brackets and bolt-on axle brackets. ZERO cutting or welding required to install!
 
Kits come with adjustable poly bushings at the frame end, and poly bushing at the axle side. 
Each bar is end adjustable and comes with HD replaceable poly bushings. Mounting brackets are made out of 1/4” cold rolled steel and are ready to bolt onto your frame and axle.
 
The bar length is 60'', (bolt to bolt, preset length due to limited mounting positions)
 
This kit fits any and all lift sizes from stock to 16'' lifts.
 
 
The kit comes with the adjustable traction bars, bolt-on frame and axle brackets, and all mounting bolts and hardware needed.
 
 
DUE TO HIG DEMANDS, EACH KIT IS CUSTOM BUILT TO ORDER, 2-3 WEEK CURRENT BUILD TIME.