03-13 Dodge Crossover Steering kit
Are you tired of death wobble and loose steering in your Dodge Ram?
We have the perfect upgrade for you! Our heavy duty crossover steering kit is a huge upgrade from the factory style steering.
Our steering does not have ball joints, but instead it has fully adjustable and replaceable high precision heim joints.
Each heim joint is made out of chromoly heat treated steel, and has a static deformation load of 45,000 lbs. and a breaking strength of over 65,000 lbs. That's a insane amount of load stress so you’ll never have to worry about a heim breaking.
Each end of the steering links is adjustable and individually replaceable, making it affordable to rebuild the steering.
Each tierod is precisely bent to offer optimal clearance on any aftermarket deep pan diff covers or dual shock setups.
Each kit is shipped in bare steel, and is ready for paint or powder coat.
The kit is available to fit different lift sizes, years and models and also available with single or dual stabilizer shocks brackets.
If you plan on running stabilizer shocks, you will need to also buy our axle mount shock brackets.
THIS KIT WILL NOT WORK WITH THE FACTORY STABILIZER SHOCK BRACKET,
You will need to buy one of our axle mount brackets in order to run shocks, click HERE for dual shock brackets.
Available for 03-2013 4x4 2500-3500 models with straight axle front ends. Will NOT fit 1500 rams with a IFS or 2wd trucks.
This kit will not fit 2013 and up 4th gens with the new style steering, 2014 and up trucks steering is availabe on 14-23 Dodge page.
Drag link measurement that's required is from the Passenger side knuckle, (by the balljoint and tire) to the pitman arm bolt center. Typicall measurement should fall between 39-43''.
EACH KIT IS CUSTOM BUILT TO ORDER, Current build times are approximately 2-4 weeks.
Return and Refund Policy
As all steering kits are custom made to order parts, we do NOT accept any returns and we will not issue any refunds after 24 hrs of order being placed. 24 hours after the order is placed the order is FINAL and we will NOT refund or accept any returns as the parts move forward into the custom building process.
If there is any issues with fitment or any product flaws and we will do our best to fix any problems. Please contact our office by email.
ALL SALES ARE FINAL!
FOR LIABILITY PURPOSES ALL STEERING KITS AND PARTS ARE SOLD "AS IS" AND AS ''OFFROAD USE ONLY, USE ON ROAD AT OWN RISK. (kits work perfectly fine on road)
tech specs
Heim size 7/8 chromoly. 2x LH 2x RH
Bushings- 3/4 hole stainless
Main bolt size- 5/8 or 3/4'' grade 8 fine thread with nylock nuts.
Dom tube- 1/4 wall x 1.5 OD.
Shock brackets- 1/4'' thick prewelded. w. 1/2'' holes. For standard shocks.
5/8 or 3/4 steel drill bit is needed to install. Professional install is highly recommended, preferably offroad shops that are familiar with heim joint steering kits.